Unit 4: The Construction Environment Assignment 1, UNCl, UK

Submission Format:

This report should be submitted as an individual, single-word-processed document. The structure of the report should include the following sections:

• Front Cover
• Contents Page
• Introduction
• Body of Work (with appropriate sub-headings)
• Recommendation/Conclusion
• References
• Appendices

Your report should meet the following requirements:

• Use a professional and readable font such as Tahoma, size 11.
• Apply a minimum of 1.5 line spacing.
• Ensure that the margins are no less than 2.54 cm on the left and right.

The language used should be precise and appropriate for the technical standard required for the subject.

It is encouraged to include drawings, diagrams, charts, photos, etc., to support the content. If you reference any external resources, make sure to use Harvard-Anglia-2008 referencing correctly. An explanation of Harvard Referencing is available in the college’s online VLE and can be freely downloaded.

Word Count:
The recommended word count is approximately 4000-5000 words, with a tolerance of +/- 10%. Exceeding the word count will not result in penalties, but it is essential to develop the skill of writing concisely. Excessive word counts may result in detailed feedback from your tutor on your academic ability. Citation and referencing are not included in the word count.

Command Words (Source: Pearson Higher Nationals in Construction and the Built Environment):

• Explain: Provide an account of the purposes or reasons.
• Discuss: Consider different aspects of a theme or topic, how they interrelate, and their importance.
• Produce: Bring into existence.
• Analyse: Methodically examine and break down a theme, topic, or situation, interpreting interrelationships.
• Evaluate: Make a judgment, considering various factors, using knowledge, experience, and evidence to support the decision.

Assignment Scenario Brief

1.0 Client Brief:
North Lincolnshire County Council (NLCC) is seeking to develop a coherent and deliverable transport package for the Scunthorpe train station area (see Zone 6-Preference Project). NLCC is soliciting help to design the project to:

1. Improve traffic flow around the train station, specifically the Station Road/Church Lane intersection with Oswalds Road.
2. Provide access for proposed future developments of commercial and residential properties.
3. Improve access to the proposed redevelopment of the expanded Scunthorpe train station to increase passenger volumes.

For this unit, choose one project from the six development zones listed below:

• Zone 1: Scunthorpe (100-200 capacity) Train Station Redevelopment
• Zone 2: 40 Bed Budget Hotel and Event Centre
• Zone 3: 40 Affordable Apartments Project
• Zone 4: Drive-Through Retail, Library, and Offices Development
• Zone 5: Bridge Repair and Road Resurfacing (1.2 miles) Project
• Zone 6: Proposed Bridge Replacement, construction of an Overpass towards Howdens Hill dual carriage road and its approaches

Assignment Tasks and Guidance

Design Proposal Report – Part 1:

You are required to provide a report and personal development plan that gives an overview of the following:

1. Historical Development and Professional Roles:
   • The historical development of the chosen project site.
   • The roles and relationships of professionals involved in the project and how they ensure public safety while supporting the industry.
2. Sustainability, Equality, Diversity, and Inclusion Strategies:
   • Strategies to ensure the sustainability of the project.
   • Promotion of equality, diversity, and inclusion throughout the project, identifying the importance and challenges that may hinder this.
3. Cost Control and Professional Standards:
   • The importance of controlling and monitoring costs in the construction project.
   • How professional bodies, legislation, and regulation ensure safety during construction and occupation.
4. Project Handover and Quality Assurance:
   • The processes and requirements for project handover.
   • Ensuring the quality of work and timely completion.

Design Proposal Report – Part 2:

Prepare a personal development plan that explores the routes to employment and progression within the construction industry, covering the following:

1. Routes to Technical and Employability Skills:
   • The pathways to achieve subject-relevant technical skills and employability skills.
   • The role of professional bodies in supporting career development.
2. Continuous Professional Development (CPD) and Lifelong Learning:
   • How CPD and lifelong learning can support your career progression.
   • Building leadership and management capacity in your organization.