Unit 7 Graphical Detailing in Construction Assignment Brief
| Qualification | Pearson BTEC Level 3 National Diploma in Construction and the Built Environment |
| Unit Title | Unit 7: Graphical Detailing in Construction |
| Unit Brief | Learners develop knowledge and apply skills to produce graphical information by manual and computer-aided design (CAD) methods. |
| Learning Aims/Objectives | A. Understand the resources required to produce construction drawings
B. Develop construction drawings for a given construction brief c. Undertake production of two-dimensional and three-dimensional freehand construction sketches. |
Unit Introduction
The construction industry is heavily reliant on communicating through the use of graphical information. Whether you are a designer, builder or planner, an understanding of drawn information and the ability to produce it yourself is an essential part of your work. Information can be produced using manual or CAD methods. Although the industry is fast moving towards CAD, skills in the use of manual methods remain very important, especially those to make freehand sketches.
In this unit, you will develop an understanding of the range of media, equipment and techniques required to produce drawings manually, and you will learn about CAD techniques and requirements.
You will produce a number of drawings following British Standards using manual and CAD methods.
This unit will help you develop the skills to produce freehand sketches.
The knowledge and skills gained in this unit are essential to prepare you for progression to various roles in architectural and landscape design. An understanding of graphical representation is essential in other roles too, such as site management, site engineering, planning and quantity surveying. It will also help you progress to a higher education programme in construction and related disciplines.
Summary of Unit
| Learning aim | Key content areas | Recommended assessment approach |
| A Understand the resources required to produce construction drawings | A1 Manual methods
A2 Computer-aided design (CAD) A3 Comparison of manual and CAD methods of drawing |
An evaluative report or presentation supported with illustrations, images and sketches of the equipment and media that learners used in producing their construction drawings.
Learners’ construction drawings produced using manual and CAD methods, following standard conventions and practices in response to a given brief. |
| B Develop construction drawings for a given construction brief | B1 Construction drawings | |
| C Undertake production of two-dimensional and three-dimensional freehand construction sketches | C1 Principles, techniques and conventions
C2 Freehand sketches C3 Skills, knowledge and behaviours |
A portfolio of 2D and 3D freehand sketches. The portfolio should demonstrate the skills to use two- and three-point perspectives. |
Assessment Criteria
| Pass | Merit | Distinction |
| Learning aim A: Understand the resources required to produce construction drawings | A.D1 Evaluate the use of manual and CAD methods to produce drawings for a given building in terms of their resource requirements, efficiency and cost.
B.D2 Produce high-quality, fully annotated construction drawings for a two-storey building drawn accurately to an appropriate scale, containing detailed technical information following BS 1192:2007 standards. |
|
| A.P1 Explain the use of media and equipment to produce manual drawings for a given building.
A.P2 Describe the resources required to produce CAD drawings for a given building. A.P3 Compare manual and CAD methods for the production of drawings in terms of their resource requirements, efficiency and cost. |
A.M1 Analyse the use of manual and CAD methods to produce drawings for a given building in terms of their resource requirements, efficiency and cost. | |
| Learning aim B: Develop construction drawings for a given construction brief | ||
| B.P4 Produce construction drawings for a two-storey building drawn to an appropriate scale, containing some technical information following
BS 1192:2007 standards. |
B.M2 Produce good-quality construction drawings for a two-storey building drawn accurately to an appropriate scale, containing appropriate technical information following BS 1192:2007 standards. | |
| Learning aim C: Undertake production of two-dimensional and three-dimensional freehand construction sketches | C.D3 Produce high-quality, fully annotated 2D and 3D freehand sketches for the interior and exterior of a building with accurate convergence to vanishing points. | |
| C.P5 Produce annotated 2D and 3D freehand sketches, using appropriate conventions,
for the interior of a building. C.P6 Produce annotated 2D and 3D freehand sketches, using appropriate conventions, for the exterior of a building. |
C.M3 Produce good-quality, annotated 2D and 3D freehand sketches for the interior and exterior of a building with convergence to vanishing points. | |
Are You Searching Answer of this Question? Request British Writers to Write a plagiarism Free Copy for You.
Chat Now